Once you have imaged the 12"x18" sheet, place
it front side down with the top of the folder nearest you. Using a dark-colored
work surface will be helpful.
Starting with the right-hand pocket (which will be to
your left, as the folder is upside down), bend back and fold both tape
strips at about a 90° angle as shown.
Visually
align the pocket to the bottom edge of the folder starting at the center. Be
careful not to allow the exposed tape to come in contact with the folder
until you are sure the position is correct!
Watch the
outer edge of the pocket as you begin to bring it down to the 12"x18" sheet.
Adjust left to right if necessary and when aligned, press the outer edge
onto the sheet.
While holding the pocket in place with your left hand,
pull the bottom tape liner out from under the pocket. Then pull the upper
tape liner away and lightly "swipe" the pocket to adhere it into place.
